EEPower

Latest Mergers & Acquisitions Technical Articles

Categories

Nothing to show for Mergers & Acquisitions category yet. Here are some other technical articles that may interest you.
Higher VGS Threshold Voltage Benefits in Resonant Applications

Higher VGS Threshold Voltage Benefits in Resonant Applications

This article highlights the impact of a super junction MOSFET gate-source threshold voltage (VGSth) in soft switching applications, using a…


Overcoming the Challenges of Characterizing High Speed Power Semiconductors

Overcoming the Challenges of Characterizing High Speed Power Semiconductors

This article discusses DPT fixture design to obtain repeatable and reliable results from a DPT setup.


Electrical Grounding Using the Isolated (or Ungrounded) Method

Electrical Grounding Using the Isolated (or Ungrounded) Method

Learn about the isolated or ungrounded method of system grounding, its main characteristics, advantages, disadvantages, and areas of application.


Avalanche Ruggedness of SiC MPS Diodes Under Repetitive Unclamped-Inductive-Switching Stress

Avalanche Ruggedness of SiC MPS Diodes Under Repetitive Unclamped-Inductive-Switching Stress

This article highlights avalanche ruggedness of discrete 1.2 kV SiC MPS diodes.


Thermal Endurance Estimation of Magnetic Components Used in Embedded Automotive Applications

Thermal Endurance Estimation of Magnetic Components Used in Embedded Automotive Applications

This article reviews the common definitions of temperature stated for an insulating material to have an idea of its resistance to heat versus time.


Properly Validating Output Chokes: Ferrite vs. Dust Core

Properly Validating Output Chokes: Ferrite vs. Dust Core

For the emerging mega-watt applications with SiC power devices, the proper validation of output chokes poses great challenges.


Improving Vacuum Solder Reflow for Challenging Power Module Packaging

Improving Vacuum Solder Reflow for Challenging Power Module Packaging

This article discusses the evaluation of flux-free soldering process for bare copper DBC substrate to Nickel-plated copper base plate soldering.


Design Considerations for a GaN-Based High Frequency LLC Resonant Converter

Design Considerations for a GaN-Based High Frequency LLC Resonant Converter

This article discusses the benefits of commercial GaN power transistors in comparison to Si SJMOS and SiC MOS transistors for a soft-switching LLC…


What Makes a Strong Magnetic Design?

What Makes a Strong Magnetic Design?

The story of magnetics in Europe has many important researchers and engineers involved in winding coils and preparing winding machines.


AI-Powered Architecture Unleashes Future Silicon IGBT and SiC Improvements

AI-Powered Architecture Unleashes Future Silicon IGBT and SiC Improvements

This article discusses Pre-Switch's solution for the elimination of switching losses by incorporating AI into the Auxiliary Resonant…


 Value Enhancement of Full SiC 3.3kV Power Module

Value Enhancement of Full SiC 3.3kV Power Module

This article focuses on the 2-level inverter and use this topology to exhibit the results


How to Analyze Control Loop Stability with Bode Plots Using Modern Oscilloscopes

How to Analyze Control Loop Stability with Bode Plots Using Modern Oscilloscopes

This article presents important topics to consider in order to make accurate Bode plots for control loops in switched mode power supplies.


The Optimal Design for High Frequency GaN-Based Totem Pole PFC

The Optimal Design for High Frequency GaN-Based Totem Pole PFC

This article highlights GaN Systems EMI filter modelling methodology for a high frequency Bridgeless Totem Pole Power Factor Correction Circuit…


The Effects of PCB Design on Ignition IGBTs Thermal Performance

The Effects of PCB Design on Ignition IGBTs Thermal Performance

This article presented the impact of the use of different thermal PCB PADs on the thermal performance of Ignition IGBTs.


Challenges and Solutions High Power Density Adapters and Chargers

Challenges and Solutions High Power Density Adapters and Chargers

This article features Infineon USB-PD adapters that supports a wide range of output voltages and power up to 60 W for charging different end…


The Intelligent Power Module Concept for Motor Drive Inverters

The Intelligent Power Module Concept for Motor Drive Inverters

This article highlights Mitsubishi Electric Europe B.V. DIPIPM™ series package that offers the highest level of integration and compactness for…


Model Continuity From Offline Simulation to RealTime Testing

Model Continuity From Offline Simulation to RealTime Testing

The dream of many engineering managers is having a single simulation model or “digital twin” for a newly developed product or application. This…


EconoDUAL 3 has Highest Power Density and Performance Using New IGBT7

EconoDUAL 3 has Highest Power Density and Performance Using New IGBT7

This article highlights Infineon chipset of IGBT7 and emitter-controlled 7 diode that is user-friendly and optimized to fulfill the GPD requirements.


A Step Forward for Benchmark and Design Tools for Power Electronics

A Step Forward for Benchmark and Design Tools for Power Electronics

This article presents tools that should help designers overcome design and test challenges that can win in the market.


Choosing the Right Current Sensor to Observe the Current Waveform of Switching Devices

Choosing the Right Current Sensor to Observe the Current Waveform of Switching Devices

This article highlights Hioki E.E. Corporation evaluation system using development environment devices and measurements using current sensors.