Modern industrial plants place high demands on the reliability and interference immunity of power supplies. Typically, the plant components are…
January 18, 2023 by Timur Uludag
There was a time when shunt solutions were considered the safe choice in sensor technology. Let's take a look at how things have changed.
January 16, 2023 by Tim Kaske
So far, the evolution of integrated current sensors (ICSs) has been slow and gradual. Current measurement technology has been developed…
October 04, 2022 by LEM
The International Conference on Integrated Power Electronics Systems (CIPS) focuses on the technological background, starting with the components…
July 09, 2022 by Andreas Lindemann
Electrification of Road, Off-road, Marine, and Air vehicles; development of Renewable Energy Electrical Sources, and Energy Storage; monitoring and…
December 08, 2021 by Lou Law
Although range anxiety is disappearing from the short list of objections to EV adoption, it has been replaced by recharging speed angst. For the…
November 26, 2021 by Michael DiGangi, ACEINNA
This article highlights Pewatron on cost reduction opportunities in measuring the traction current in universally used three phase motors.
July 23, 2021 by Warren Pettigrew
The demand for high power density converters in EVs requires further integration of sensors within power electronics.
July 09, 2021 by Thomas Zöls
This series provides a look at how different physical phenomena can be converted into an electrical signal. In this article, the third in our…
April 12, 2021 by Alex Roderick
While prominent for AC lines, DC voltage detectors are hard to find and seldom used in power electronics especially for voltages higher than 1000V,…
December 07, 2020 by Luis Ostero
This article explains different substation shielding techniques used to reduce the chance of and damage from direct lightning strikes.
December 04, 2020 by Lorenzo Mari
This article highlights J&D the development of open loop current sensors to measure higher current with low power consumption.
November 30, 2020 by Lily Kim
This article highlights LEM DVC 1000 family of electronic based voltage sensors that offers this high level of insulation, up to 4.2kV.
November 23, 2020 by Damien Leterrier
Learn how to measure soil resistivity with the Wenner Method.
September 01, 2020 by Lorenzo Mari
This article highlights the latest results in the area of low pressure/ no pressure silver sintering on using solvent free silver sintering pastes.
August 10, 2020 by Michael Doktor
This article highlights Plexim Incorporated PLECS is a simulation tool developed for drives engineers for very efficient and robust modeling of…
February 02, 2020 by Munadir Ahmed
This article highlights TDK Electronics AG Piezo Haptic Solutions PiezoHapt™ L that are L8060 and L3015, as world’s thinnest actuators for…
September 20, 2019 by Christoph Jehle
This article highlights Hioki E.E. Corporation evaluation system using development environment devices and measurements using current sensors.
September 13, 2019 by Atsushi Nomura
This article highlights Raztec Sensors company its new current probe for measuring even very high current intensities, with a small size and at low…
May 21, 2019 by Warren Pettigrew
This article highlights LEM three new families of compact open-loop current sensors that measure higher currents than earlier sensors of the same…
May 09, 2019 by David Barbagallo
Don't have an EEPower account? Create one now.
Forgot your password? Click here.
