EEPower

Latest Distributed Energy Resources Articles

Categories

Tektronix Intros Wideband Shunts and High Voltage Differential Probe

Tektronix Intros Wideband Shunts and High Voltage Differential Probe

The new wideband shunts and the high-voltage differential probe are designed to enable engineers to extend measurement coverage from precision…


new products About 20 hours ago by Austin Futrell
Third Generation SiC MOSFETs for Highly Efficient EV Drivetrains

Third Generation SiC MOSFETs for Highly Efficient EV Drivetrains

Learn how Bosch’s Gen3 SiC MOSFETs boost EV drivetrain performance. Its new trench architecture delivers 20% lower resistance and 10% lower…


Google Backs Co-Located Generation and VPPs for Data Centers

Google Backs Co-Located Generation and VPPs for Data Centers

As Google develops new data centers, it will focus on powering them with both new generation and grid-flexibility programs.


News Jun 19, 2026 by Shannon Cuthrell
Briefs: Shaping the Future in Solar, Hydro, EVs, and Space

Briefs: Shaping the Future in Solar, Hydro, EVs, and Space

Qcells, Voith, the Missouri University of Science and Technology, and Nexperia and IAV are pushing boundaries in space technology, solar cells,…


News Jun 18, 2026 by Karen Hanson
More Power, More Tokens: How SSTs Are Reshaping Data Center Infrastructure

More Power, More Tokens: How SSTs Are Reshaping Data Center Infrastructure

The transition from AC distribution to the 800 V DC architecture is reshaping the data center power infrastructure, boosting token generation and…


When the Grid Becomes Software

When the Grid Becomes Software

How utilities can avoid the telecom industry’s historical virtualization mistakes to successfully build a software-orchestrated, resilient energy…


Improving Efficiency and Thermal Margin in a 204 W Quarter-Brick Converter Using a 150 V MOSFET

Improving Efficiency and Thermal Margin in a 204 W Quarter-Brick Converter Using a 150 V MOSFET

Learn how 150 V SuperQ MOSFETs boost 204 W converter efficiency greater than 0.8%, cut heat by 2 W, and lower peak temps by 31°C. They improve…


Ruggedness Matters: MOSFETs Built on Mature Planar Technology

Ruggedness Matters: MOSFETs Built on Mature Planar Technology

Many industrial and mission-critical systems continue to depend on MOSFETs with proven robustness and predictable behavior under stress. Learn how…


Enhanced Power Module for PV and PCS/ESS Applications

Enhanced Power Module for PV and PCS/ESS Applications

In this article, we present two key module-based technologies that further improve inverter performance—robust silicon nitride (Si3N4) substrate…


 Securing and Scaling a Connected Grid: Communications Architecture

Securing and Scaling a Connected Grid: Communications Architecture

Modernizing the grid into a distributed, data-driven system requires secure and flexible communication networks to handle the growing complexity of…


Distribution Transformers and Voltage Regulation—Part 1: Introduction

Distribution Transformers and Voltage Regulation—Part 1: Introduction

Learn how distribution transformers bridge medium-voltage feeders and end-use equipment, ensuring stable voltage through strategic placement,…


After the Flight: Why Drone Inspection Is Only Half the Job

After the Flight: Why Drone Inspection Is Only Half the Job

Maximizing the value of aerial PV inspections requires integrating thermal data into structured post-flight workflows, data prioritization, and…


Ford’s Battery Pivot Enters the Grid

Ford’s Battery Pivot Enters the Grid

Ford is moving from EVs into the fast-growing world of grid-scale energy storage.


News Jun 01, 2026 by Shannon Cuthrell
Primary Distribution Systems—Part 5: Planning for Today’s Grid

Primary Distribution Systems—Part 5: Planning for Today’s Grid

This article connects primary distribution to feeder upgrades (FLISR, right-sizing, DER/DCFC siting) for safety, quality, and restoration.


Designing Power Supplies for Industrial Functional Safety—Part 2: Creating a Safe Power Design

Designing Power Supplies for Industrial Functional Safety—Part 2: Creating a Safe Power Design

While Part 1 of this series showed what the IEC 61508 requires from power supplies to achieve functional safety, Part 2 provides insights into…


Isolated DC-DC Power Supplies: Module or Discrete Design?

Isolated DC-DC Power Supplies: Module or Discrete Design?

When is a fully integrated module the better option, and when does a discrete design offer the greater advantage? This story discusses the major…


Technical Articles May 27, 2026 by RECOM
DC-Link Capacitors: The Component That Will Make or Break AI Power

DC-Link Capacitors: The Component That Will Make or Break AI Power

Discover why next-gen film technology is crucial to meeting modern efficiency and reliability targets for 800 VDC AI data centers.


How To Bring Ultra Precise Current Measurement to All Use Cases—Not Just DC

How To Bring Ultra Precise Current Measurement to All Use Cases—Not Just DC

What are the challenges in power measurement and efficiency calculation? DCCT current transducers are hundreds of times more accurate than standard…


Reverse Recovery Charge Is Not a Constant

Reverse Recovery Charge Is Not a Constant

Reverse recovery charge, QRR, is one of those parameters most power engineers know well. It appears prominently in MOSFET datasheets, it finds its…


800 V SiC Power Module With Integrated Current Measurement

800 V SiC Power Module With Integrated Current Measurement

Take an integrated PCB-based power module and combine it with coreless current sensing. This story describes how it can deliver a compact,…