EEPower

Latest Design & Manufacturing Technical Articles

Categories

Discharger for Ultra-Capacitor Modules and Assemblies

Discharger for Ultra-Capacitor Modules and Assemblies

This article introduces Innovation Plus Power Systems' Discharger Family for ultra-capacitor modules and assemblies, reducing the discharge time.


SiC for safeguarding AC and DC power circuitry

SiC for safeguarding AC and DC power circuitry

This article discusses the novel Silicon Carbine based hybrid surge suppressor module for safeguarding AC and DC power circuitry and its benefits.


Reference Design for Inverters: First integrated solution for e-mobility and industry

Reference Design for Inverters: First integrated solution for e-mobility and industry

This article discusses the TDK and Infineon's new integrated solution for inverters for e-mobility power trains and industrial applications.


A Commercial High Temperature Capacitor Dielectric for Power Applications

A Commercial High Temperature Capacitor Dielectric for Power Applications

This article introduces DuPont Teijin Films' Teonex, a new dielectric for DC-Link and snubber power capacitors and discusses its features and…


The Future of Power Semiconductors: Rugged and High Performing Silicon Carbide Transistors

The Future of Power Semiconductors: Rugged and High Performing Silicon Carbide Transistors

This article highlights Infineon Technologies AG Silicon Carbide transistors development for industrial power electronics applications and the goal…


Radiation Action on IV Characteristics of Power Semiconductor Devices Based on Silicon

Radiation Action on IV Characteristics of Power Semiconductor Devices Based on Silicon

Results of theoretical research of influence of cumulative dose on I-V characteristics (IVC) of power semiconductor devices based on silicon are…


E-Mobility for Components and EMC – Simulation and Measurement

E-Mobility for Components and EMC – Simulation and Measurement

This article highlights IMG Electronic & Power Systems and University of Ruse Angel Kanchev simulation models of E Mobility for Components and…


Temperature Limits for Power Modules – Part 2: Lifetime

Temperature Limits for Power Modules – Part 2: Lifetime

This article talks about calculating if the module internal interconnects could withstand the temperature swings and meet the design lifetime…


PLECS Goes Real-Time: A New HILSystem for Power Electronics

PLECS Goes Real-Time: A New HILSystem for Power Electronics

This article introduces Plexim's PLECS RT Box and its benefits for system modelling, design, simulation and testing of power electronics systems.


Temperature Limits for Power Modules Part-1: Maximum Junction Temperature

Temperature Limits for Power Modules Part-1: Maximum Junction Temperature

This article features Infineon temperature limits for power module by understanding the effect of changing operating conditions and application…


Data Sheet Factors in Resistor Selection

Data Sheet Factors in Resistor Selection

This article highlights Isabellenhütte about selecting a resistor for applications using data sheets that provide factors that influence the…


Advantages of the 1200 V SiC Schottky Diode with MPS Design

Advantages of the 1200 V SiC Schottky Diode with MPS Design

This article describes how consistent innovations in device design and assembly techniques improve performance, reliability and cost position of…


Biricha Lecture Notes on Analog and Digital Power Supply Design Part 2D

Biricha Lecture Notes on Analog and Digital Power Supply Design Part 2D

This article discusses the reasons why Proportional Integral Derivative (PID) controller is not best suited for stabilising most switch-mode power…


Incorporating Magnetic Saturation of a PMSM for Drive Systems Modeling in PLECS

Incorporating Magnetic Saturation of a PMSM for Drive Systems Modeling in PLECS

This article discusses the flux-based PMSM models incorporating saturation using analytical functions and look-up tables and offers tips on the…


Rethinking Power Analysis

Rethinking Power Analysis

This article introduces ZES ZIMMER's innovations to their power analyzers in terms of DUT physical interface, user interface and interface to…


The Focus is on Passive Components for Further Gains in SMPS Efficiency

The Focus is on Passive Components for Further Gains in SMPS Efficiency

This article discusses the passive components and effects that are important things to consider to have further gains in SMPS efficiency.


Adding Flexibility to ACDC Power Supply Design that Uses PFCLLC Topology

Adding Flexibility to ACDC Power Supply Design that Uses PFCLLC Topology

This article discusses the advantages of PFC/LLC Combo controller and their key features and benefits in adding flexibility to power supply designs.


BiAgX HighTemperature LeadFree Pbfree Solder Paste

BiAgX HighTemperature LeadFree Pbfree Solder Paste

This article introducest Indium Corporation's BiAgX, a high-temperature lead-free solder paste for surface-mount-technology (SMT) applications.


Increased Power Density and Performance with 3D Embedded Substrate Technologies

Increased Power Density and Performance with 3D Embedded Substrate Technologies

This article discusses the investigation done by PSMA and offers the important core technologies required for embedding substrates.


Electrical Power Supply Matrix Systems

Electrical Power Supply Matrix Systems

This article highlights AEPS-GROUP electrical power supply systems with GaN technology instead of GaAs technology for a reduction in APAR power…