Using shunts to measure currents in power analysis might be an option for small currents, but when you look at measuring currents above 50A then…
May 18, 2021 by Kai Scharrmann
This article highlights PERMO GaN and SiC technologies which permit to obtain the most efficient converters in the smallest size.
April 05, 2021 by Patrick Fouassier
This article discusses the challenges that thermal management raises due to increased power density, especially with chip-scale-packaging (CSP).
March 15, 2021 by John Glaser
This article highlights Ing Buro Springett elimination of the source of the noise by replacing the mosfet with a source tabbed, Nexperia GAN063-650W.
March 09, 2021 by Nigel Springett
This article introduces Comau rethinking electrical motor and transmission assembly reducing costs and optimizes electrification time to market.
March 08, 2021 by Ermanno Faccin
This article introduces software MFis Wire and its advantages in significantly shortening time for creating complex 3D geometry models of bond wire…
March 04, 2021 by Raffael Schnell
This article will analyze the challenge of measuring the saturation roll off and introduce the BsT-pulse which attempts to solve this problem.
February 02, 2021 by JC Sun
This article highlights Empower Semiconductor IVR solution that is applicable to a whole range of applications, making it attractive for inventory…
December 23, 2020 by Mukund Krishna
Learn about the fundamentals of lightning strikes and the risk they pose for electric power systems and operator safety.
November 13, 2020 by Lorenzo Mari
This article discusses the modular power supply and its advantages over other options.
November 09, 2020 by Dylan Howes
The metal alloyed powder core is a kind of magnetic core, which is made from ferromagnetic alloy. After casting, it is pulverized, isolated with an…
November 04, 2020 by JC Sun
This article explains the generation mechanism of this leakage current along with its path through appropriate circuit diagrams.
October 28, 2020 by Milind Dighrasker
Learn about the maximum step and touch voltages that people and animals in substation surroundings can tolerate.
October 16, 2020 by Lorenzo Mari
This article focuses on the stressor of current. Parts were tested to failure under two specific conditions that demonstrate the exceptional…
October 12, 2020 by Alex Lidow
Learn about Earth potential gradients and shock situations in substations.
October 09, 2020 by Lorenzo Mari
This article showcases how 3D printed heatsinks can increase reliability by enabling extended life of power semiconductors, reduce size, weight,…
October 07, 2020 by Thomas Ebert
This article describes the steps of development and research carried out to design a clamping system for disc semiconductors and analyzes the…
October 05, 2020 by Proton-Electrotex
Learn about the main parts of a substation grounding system
October 02, 2020 by Lorenzo Mari
Learn about the methods used to lower the resistance of a grounding electrode
September 25, 2020 by Lorenzo Mari
This article highlights SONOSCAN Acoustic micro imaging (AMI) tools that can nondestructively image internal structural anomalies such as cracks or…
September 24, 2020 by Tom Adams
Don't have an EEPower account? Create one now.
Forgot your password? Click here.
