HVCB High Voltage Precision Chip Resistors Offer 0.1% Tolerance and 25 ppm TCR.
HVCB High Voltage Precision Chip Resistors Offer 0.1% Tolerance and 25 ppm TCR.
Their goals are to improve efficiencies in the design and testing validation of GaN and SiC semiconductors.
Their goals are to improve efficiencies in the design and testing validation of GaN and SiC semiconductors.
The first series member is a highly integrated half-bridge device aimed at wireless charging applications.
The first series member is a highly integrated half-bridge device aimed at wireless charging applications.
R53 film capacitor is miniaturized, AEC-Q200 qualified and has the highest IEC robustness classification for applications…
R53 film capacitor is miniaturized, AEC-Q200 qualified and has the highest IEC robustness classification for applications requiring the highest…
Revolutionary new QUASAR batteries from Eternity Technologies offer longer running time, faster charging & improved…
Revolutionary new QUASAR batteries from Eternity Technologies offer longer running time, faster charging & improved performance for material…
The AL8862 integrates a low RDS(ON) power switch and a high-side output current sensing circuit.
The AL8862 integrates a low RDS(ON) power switch and a high-side output current sensing circuit.
The isolated, 1.5W DC/DC device employs a tiny internal planar transformer to cut power solution sizes in half for EVS and HEVs.
The isolated, 1.5W DC/DC device employs a tiny internal planar transformer to cut power solution sizes in half for EVS and HEVs.
New device completes Microchip’s family of Vref products providing increased reliability and AEC-Q100 qualification.
New device completes Microchip’s family of Vref products providing increased reliability and AEC-Q100 qualification.
The new unit features multiple levels of control, affording a high level of protection for SiC MOSFETs and the systems they power.
The new unit features multiple levels of control, affording a high level of protection for SiC MOSFETs and the systems they power.
ADL8150 features low phase noise of -172 dBc/Hz at 10 kHz offset, 12 dB signal gain, and +30dBm OIP3.
ADL8150 features low phase noise of -172 dBc/Hz at 10 kHz offset, 12 dB signal gain, and +30dBm OIP3.
Electric vehicle (EV) charging solutions provider Wallbox has recently unveiled a new public charging station at the IAA…
Electric vehicle (EV) charging solutions provider Wallbox has recently unveiled a new public charging station at the IAA MOBILITY 2021 event in…
The new transmitter and receiver pair can charge high-end smartphones in as little as 30 minutes.
The new transmitter and receiver pair can charge high-end smartphones in as little as 30 minutes.
The SD11900 series maximizes power density while minimizing loop inductance with a pin configuration to allow simple…
The SD11900 series maximizes power density while minimizing loop inductance with a pin configuration to allow simple power bussing.
The non-isolated IBC offers over 98% efficiency at half load and can deliver a continuous 860 watts of output power.
The non-isolated IBC offers over 98% efficiency at half load and can deliver a continuous 860 watts of output power.
The new package enables EM/IR assessment of analog, digital, and mixed-signal IC designs of any size before committing to silicon.
The new package enables EM/IR assessment of analog, digital, and mixed-signal IC designs of any size before committing to silicon.
The new enhancement mode power transistor features a maximum ID of 80 amps with a die size of only 3.25 x 3.25mm.
The new enhancement mode power transistor features a maximum ID of 80 amps with a die size of only 3.25 x 3.25mm.
ABB's new charger has a maximum output of 360 kW and is capable of fully charging any electric car in 15 minutes or less,…
ABB's new charger has a maximum output of 360 kW and is capable of fully charging any electric car in 15 minutes or less, meeting the needs of…
The new converters accommodate inputs of 9-36V or 18-76V and also offer adjustable outputs of 3.3, 5, 12, or 15 volts.
The new converters accommodate inputs of 9-36V or 18-76V and also offer adjustable outputs of 3.3, 5, 12, or 15 volts.
The new family of devices feature an integral USB PD Controller and support USB PD 3.0 + PPS and QC4 protocols.
The new family of devices feature an integral USB PD Controller and support USB PD 3.0 + PPS and QC4 protocols.