Question: What is a good solution for generating a tiny dc supply voltage of a few hundred millivolts? Answer: All that is needed is a clean…
Question: What is a good solution for generating a tiny dc supply voltage of a few hundred millivolts? Answer: All that is needed is a clean…
Given that the EU1 and FDA2 definitions of what constitutes a medical device encompass a large majority of medical…
Given that the EU1 and FDA2 definitions of what constitutes a medical device encompass a large majority of medical products other than drugs, it is…
This article will look at some of the most relevant energy usage labelling standards, how they are evolving and how they…
This article will look at some of the most relevant energy usage labelling standards, how they are evolving and how they can be used to provide…
The EZ-PD™ BCR (Barrel Connector Replacement) is a highly integrated USB-C controller, together with the USB-C…
The EZ-PD™ BCR (Barrel Connector Replacement) is a highly integrated USB-C controller, together with the USB-C connector, it replaces barrel…
Nexperia announced two PESD5V0R1BxSF extremely low clamping and capacitance bidirectional Electrostatic Discharge (ESD)…
Nexperia announced two PESD5V0R1BxSF extremely low clamping and capacitance bidirectional Electrostatic Discharge (ESD) protection diodes.
The two power supply unit (PSU) designs offer either full bridge LLC resonant converter or bridgeless totem-pole PFC formats.
The two power supply unit (PSU) designs offer either full bridge LLC resonant converter or bridgeless totem-pole PFC formats.
The isolated, 1.5W DC/DC device employs a tiny internal planar transformer to cut power solution sizes in half for EVS and HEVs.
The isolated, 1.5W DC/DC device employs a tiny internal planar transformer to cut power solution sizes in half for EVS and HEVs.
The non-isolated IBC offers over 98% efficiency at half load and can deliver a continuous 860 watts of output power.
The non-isolated IBC offers over 98% efficiency at half load and can deliver a continuous 860 watts of output power.
The convection cooled units provide 12, 24, 36, 48, or 72VDC and operate from inputs centered on 24, 48, or 125VDC
The convection cooled units provide 12, 24, 36, 48, or 72VDC and operate from inputs centered on 24, 48, or 125VDC
Designed with safety in mind, the new devices are cooled via free air convection and offer typical efficiencies of 93%
Designed with safety in mind, the new devices are cooled via free air convection and offer typical efficiencies of 93%
British battery startup Nexeon will lead a 12-month project to deliver test EV battery cells combining lithium-ion cell…
British battery startup Nexeon will lead a 12-month project to deliver test EV battery cells combining lithium-ion cell design with silicon anode…
A series of AC/DC and DC/AC baseless power converters were developed in cooperation with Europe’s Clean Sky Consortium.
A series of AC/DC and DC/AC baseless power converters were developed in cooperation with Europe’s Clean Sky Consortium.
The operating environment for mains-powered electrical equipment is separated into four overvoltage category (OVC) areas…
The operating environment for mains-powered electrical equipment is separated into four overvoltage category (OVC) areas according to their level…
The new units operate from 100 to 270VAC inputs and provide either 5V, 12V, or 15V outputs.
The new units operate from 100 to 270VAC inputs and provide either 5V, 12V, or 15V outputs.
The nine dual output, bipolar surface mounted (SMT) devices are aimed at powering MOSFET gate drivers.
The nine dual output, bipolar surface mounted (SMT) devices are aimed at powering MOSFET gate drivers.
In addition to offering either 24, 30, 36, or 48 volts, all four members of the series provide a 5-volt, 0.3A isolated…
In addition to offering either 24, 30, 36, or 48 volts, all four members of the series provide a 5-volt, 0.3A isolated standby voltage output.
The low dropout regulators (LDO) provide user-chosen outputs of either 0.8, 1.2, 1.5, 1.8, 2.5, 2.8, 3.3, or 5 volts
The low dropout regulators (LDO) provide user-chosen outputs of either 0.8, 1.2, 1.5, 1.8, 2.5, 2.8, 3.3, or 5 volts
A semiconductor trade association and an automotive industry think tank team up for a supply chain partnership.
A semiconductor trade association and an automotive industry think tank team up for a supply chain partnership.
This article highlights andividuals working on electrical circuits must use proper safety measures and personal…
This article highlights andividuals working on electrical circuits must use proper safety measures and personal protective equipment.
Facebook
Google
GitHub
Linkedin