EEPower

Latest Equipment Articles

Categories

KEMET Unveils a Line of X2 EMI Suppression Film Capacitors 

KEMET Unveils a Line of X2 EMI Suppression Film Capacitors 

The R52 series is optimally designed for the challenging environments typical of automotive, energy, and industrial Applications.


Testing Gallium Nitride Devices Under Extreme Voltage and Current Stress

Testing Gallium Nitride Devices Under Extreme Voltage and Current Stress

This article focuses on the stressor of current. Parts were tested to failure under two specific conditions that demonstrate the exceptional…


Ingeteam’s New High Power DFIG Wind Converters Obtain Certification

Ingeteam’s New High Power DFIG Wind Converters Obtain Certification

Ingeteam features a new generation of high power DFIG wind converters that have been specially developed to minimize this risk, making them the…


Modern Clamping Systems for Testing Power Semiconductor Devices

Modern Clamping Systems for Testing Power Semiconductor Devices

This article describes the steps of development and research carried out to design a clamping system for disc semiconductors and analyzes the…


KULR Joins UN Working Group To Improve Battery Shipping Standards

KULR Joins UN Working Group To Improve Battery Shipping Standards

KULR Technology Group, which develops battery safety and thermal management solutions, recently joined a United Nations working group to help…


News Sep 22, 2020 by Shannon Cuthrell
Optimizing EMI Input Filters for Switched Mode Power Supplies

Optimizing EMI Input Filters for Switched Mode Power Supplies

This article highlights a method to separate common-mode and differential-mode noise components using a dual output LISN (Line Impedance…


Monolithic Power Systems To Launch Two EMC Testing Labs

Monolithic Power Systems To Launch Two EMC Testing Labs

U.S.-based circuit manufacturer Monolithic Power Systems will open two EMC (ElectroMagnetic Compatibility) testing facilities in Michigan and…


News Sep 16, 2020 by Shannon Cuthrell
A Review of the Inner-Workings of a Surge Current Tester

A Review of the Inner-Workings of a Surge Current Tester

This article presents a unique surge current tester rated for 120kA, describes an innovative approach to forming the current based on MOSFETs and…


Designing a Double-Pulse Test System to Enable Correlation of Dynamic Characteristics

Designing a Double-Pulse Test System to Enable Correlation of Dynamic Characteristics

This article discusses important considerations when designing a standard DPT system used to correlate results between multiple test systems.


GvA Leistungselektronik GmbH and IRS Systemtechnik GmbH Produce Surge Current Test Bench

GvA Leistungselektronik GmbH and IRS Systemtechnik GmbH Produce Surge Current Test Bench

The latest joint development is a test stand for surge current tests up to 35kA for the IPH Institute "Prüffeld für elektrische…


Designing Next Generation Surge Current Testers

Designing Next Generation Surge Current Testers

ncreasing the power capacity of semiconductors and designing devices with a rectifier element diameter of 100 mm or more both require a surge…


Rigol’s Real-time Spectrum Analyzers: Now With VNA Extension

Rigol’s Real-time Spectrum Analyzers: Now With VNA Extension

RIGOL Technologies is expanding its real-time spectrum analyzers series RSA5000 and RSA3000 with a VNA option.


Boonton Launches New USB Power Sensor to Uniquely Enable Characterization of Wi-Fi 6 Devices

Boonton Launches New USB Power Sensor to Uniquely Enable Characterization of Wi-Fi 6 Devices

Boonton announced today the introduction of the RTP5008 Real-Time Peak USB Power Sensor which uniquely enables characterization of Wi-Fi 6 devices…


The Fall-of-Potential Method vs. the Clamp-on Tester Method

The Fall-of-Potential Method vs. the Clamp-on Tester Method

Learn about the pros and cons of the fall-of-potential method and the Clamp-on tester resistance method.


Modular EMI Filter Selection for AC-DC Converters

Modular EMI Filter Selection for AC-DC Converters

This article highlights XP Power modular EMI filter selection for AC-DC converters.


Optimized EMC Conditions in Electrical Drive Systems

Optimized EMC Conditions in Electrical Drive Systems

This article introduces the utilization of FUSS-EMV all-pole sine filter for applications running at lower switching frequencies.


ROHM and LEADRIVE Partner and Create a Joint Laboratory for Developing and Testing SiC Technology

ROHM and LEADRIVE Partner and Create a Joint Laboratory for Developing and Testing SiC Technology

ROHM and LEADRIVE unite to develop next-generation SiC solutions for the electrical vehicle market and to promote world-wide market adoption of SiC…


News Jul 23, 2020 by Stephanie Leonida
40V Synchronous Buck Converters from Diodes Deliver High Efficiency with Low EMI

40V Synchronous Buck Converters from Diodes Deliver High Efficiency with Low EMI

Diodes Incorporated announces the AP64350Q/AP64351Q/AP64352Q series of automotive-compliant, 3.5A, synchronous buck converters for point of load…


NRL Begins Testing Solar Power Satellite In Orbit

NRL Begins Testing Solar Power Satellite In Orbit

A team of researchers at the United States Naval Research Laboratory (NRL) have conducted their first solar power satellite experiment


TDK Brings Redundancy to its TMR Angle Sensor Portfolio and Aligns with ASIL D Safety Standards

TDK Brings Redundancy to its TMR Angle Sensor Portfolio and Aligns with ASIL D Safety Standards

TDK Corporation