Powervation Announces PowerSMART v1.1 Upgrade and New Firmware for PV3012 Controller
Powervation Ltd. has released PowerSMARTâ„¢ v1.1, an updated version of their design tool, as well as, the release of a new PV3012 firmware for the PMBus-compliant dual-phase digital controller. The PowerSMART design tool allows users to communicate with and configure the Powervation digital power control ICs (e.g., PV3101 and PV3012) from their laptop using a standard USB connection. The design tool enables the user to program the controller and optimize its performance, while carefully monitoring key power supply status parameters.
Designers may use the tool to make simple point-and-click or numeric entry changes to parameters and quickly configure/power-up the power supply. Additionally, users may take advantage of PowerSMARTâ€™s advanced settings to access more than 60 parameters and finely tune the features to their specific needs within the GUI environment, with precision and flexibility beyond that of hardware programmed analog-based solutions. PowerSMART v1.1 builds upon the initial release of the platform introduced in 2011. The new release gives access to new parameters useful in power supply design, supports a new release of the PV3012 firmware, and provides additional flexibility and control of existing features.
Leveraging the companyâ€™s core hardware and firmware technologies, Powervationâ€™s PMBusâ„¢ compliant single-phase and dual-phase digital controllers use a proprietary DSP/RISC dual-core architecture with a precision data acquisition engine running advanced control and power management algorithms in firmware. This architecture enables a rich set of features, and a high degree of flexibility within the firmware environment. The PowerSMART v1.1 release coincides with the new release of firmware for the companyâ€™s PV3012 dual-phase controllers.
The firmware upgrade provides additional features and flexibility related to: protection features, temperature sensing support, PMBus manufacturer specific commands, and performance enhancements for Powervationâ€™s digital stress share bus (DSSÂ®). Additionally, users now have greater control over Powervationâ€™s Auto-ControlÂ® parameters and performance, which in demanding DDR3 and DDR4 voltage regulator designs, has proven to be an advantage for transient performance and thus BOM cost.
Comments Powervationâ€™s Director of Product Marketing, David New: â€œWith these new releases, Powervation continues to improve upon the flexibility of our products and the features accessible with our PowerSMART design tool, while introducing greater performance for our PV3012 platform. With our recent success in DDR and our focus on high-end computing, the new firmware and design tool are designed to address the features and flexibility needed in computing, while providing a performance edge applicable in many applications.â€
The PV3012Q-A2 is designed to function with all leading driver and FET solutions to allow the designer maximum flexibility, powering ASICs, FPGAs, DDR memory, processors, and general POLs for networking and computing applications. The RoHS compliant PV3012Q-A2 is shipping now in 32-lead QFN packaging. The PowerSMART design tool is offered at no charge, and is available for download from the Powervation website.