Diodes Inc Introduces DIOFETs for PoL Converters

Monolithically integrating a power MOSFET and anti-parallel Schottky diode into a single die, Diodes Incorporated has introduced the first products from its proprietary DIOFET process.

Used in the low-side MOSFET position of synchronous buck point-of-load (PoL) converterss, the DMS3014SSS and DMS3015SSS improve the efficiency and lower the operating temperature of fast switching PoL converters in high-volume computing, telecom and industrial applications.

With typical RDS(ON) ratings of only 10mohm and 8.5mΩ respectively at VGS of 10V, the devices minimize the conduction losses traditionally associated with low-side MOSFETs. At the same time, the forward voltage of the DIOFET’s integrated Schottky diode, is 25% lower than comparable MOSFET/Schottky solutions and 48 percent lower than that of the intrinsic body diode of a typical MOSFET, thereby minimizing switching losses and improving efficiency. The low QRR of DIOFET’s integrated Schottky and its softer reverse recovery characteristics further contribute towards minimizing body diode switching losses.

In benchmark tests, the DIOFETs operate at a temperature that is 5% lower than that of competing solutions. As every 10°C reduction in MOSFET junction temperature doubles lifetime reliability the lower operating temperature of the DIOFETs significantly increases the reliability of the PoL converter, says the company.