XP Power Offers 8 To 12W DC-DC Converters In Compact DIP-24 Package

XP Power announced three families of low power, isolated and regulated dc-dc converters. In an industry standard metal-cased DIP-24 package measuring just 1.25 x 0.80 x 0.40" (31.75 x 20.32 x 10.40mm), the converters offer 8, 10 and 12 Watt output models with a 2:1 input voltage range. The DIP-24 format makes them suitable as a drop-in replacement or a power upgrade in existing end products; saving the need to re-design the PCB layout.

The JCJ08 and JCJ10 series are rated at 8 and 10W respectfully while the JCG12 is rated at 12W. The units offer the wide 2:1 input voltage options of 9-18Vdc, 18-36Vdc or 36-75Vdc, covering the nominal application voltages of 12, 24 and 48Vdc. Single output models are available with an output voltage of 2.5, 3.3, 5, 12 or 15Vdc. Dual output models offer ± 12 or ± 15Vdc outputs and ±5Vdc for the JCJ08.. The outputs are regulated to within ±0.5% over all input conditions and to less than ± 1% for all load conditions. The JCJ08 and JCJ10 models provide an input to output isolation of up to 1,500Vdc for 1 minute. The JCG12 series is rated to 1,600Vdc isolation.

The units operate over a wide temperature range of -40 to +100°C. No additional heat sinking or forced airflow is required for the converter to achieve its full output rating. The JCG12 units feature a remote on/off signal. This can be used to control the output rails or to sequence start-up procedures. All units feature overvoltage and continuous short circuit protection.

A 500 pcs order of a JCJ08 single output model is priced at $26.52. 500 pcs of the dual output JCG12 is priced at $31.98.