Linear Tech Configurable Dual Output Step-Down Converter Delivers Either 3A/1A or 2A/2A

Linear Technology announced the LTC3546, a dual channel, synchronous buck regulator which can deliver either dual 2 outputs or 3A from one channel and 1A from the other, with up to 96% efficiency. Using a constant frequency, current mode architecture, the LTC3546 operates from an input voltage range of 2.25 to 5V, making it suitable for single cell Li-Ion/polymer, or multicell alkaline/NiCad/NiMH applications.

Each output is adjustable from 0.6 to 5V and has turn-on supply tracking. Separate RUN and Power Good PINs enable independent control of each channel. The LTC3546’s switching frequency can be set at 2.25MHz or is programmable from 750kHz to 4MHz enabling the designer to optimize efficiency while avoiding critical noise-sensitive frequency bands. The combination of its 4 x 5mm QFN-28 package and high switching frequency keeps external inductors and capacitors small, providing a very compact, thermally efficient footprint.

The LTC3546’s design consists of 2 and 1A primary synchronous switches and a 1A dependent synchronous output switch which can be externally connected to either of the primary outputs to produce either 3 and 1A outputs or dual 2A outputs. The 2A primary switch can be run either in phase with the additional switches or 180° out-of-phase via an external phase pin.

The LT3546’s Burst Mode® operation minimizes quiescent current to only 160µA (both channels on) in no load conditions. The current threshold at which BurstMode operation begins can be independently programmed for each channel, optimizing overall efficiency. For applications demanding the lowest possible noise, the LTC3546 can also be run in pulse skipping or forced continuous modes to minimize output ripple. The LTC3546 offers a Power Good indicator and is synchronizable to an external clock. Other features include external synchronization capability, overtemperature and short-circuit protection.

The LTC3546EUFD is available in a 4 x 5mm QFN-28 and is priced at $3.75 each in 1,000-piece quantities. An industrial grade version, the LTC3546IUFD is tested and guaranteed to operate from a -40 to 125°C operating junction temperature and is priced at $4.41 in 1,000-piece quantities.