4:1 Input 6W & 10W DC-DCs for Industrial and ITE Applications

XP Power has introduced two new series of wide input range chassis and DIN rail mount dc-dc converters that offer simple and rapid installation into a wide variety of industrial and ITE applications. The DTE06 and DTE10 dc-dc converters provide 6W and 10W of power, respectively, and offer a 4:1 input range, giving a wide tolerance for fluctuating supplies.

There are 2 input ranges available: The DTE0624xxx and DTE1024xxx have an input range of 9- to 36-Vdc covering nominal voltages of 12Vdc and 24Vdc; and the DTE0648xxx and DTE1048xxx have an input range of 18- to 75-Vdc covering nominal voltages of 24Vdc and 48Vdc.

The devices are supplied fully potted in chassis mount format with screw terminals for simple, time saving mounting and connection. A DIN rail mount is optionally available for use in control cabinets and household consumer units. A power good LED indicator provides at-a-glance confirmation of correct operation.

DTE06 and DTE10 dc-dc converters

All of the dc-dc converters are IEC/UL/cUL 62368-1 safety approved and offer 3.0kVdc isolation between the supply and load. They also comply with EN55032 Class A emissions with no external components, meaning that no additional filtering is required for EMC compliance.

The device itself and the equipment that it is powering benefit from a range of safety features including input undervoltage, short circuit and overload protection. A convenient remote on/off feature allows the dc-dc converters to be easily controlled.

The rugged and competitively priced DTE06 and DTE10 series operate over a -40°C to +105°C temperature range, and deliver full rated power at temperatures up to +80°C.

The DTE06 series is priced at $31.20 for 500 pcs orders and is available from Allied Electronics, Digi-Key, Mouser, Newark or direct from XP Power.