Atmel Launches New Driver-IC Family for Automotive High-temperature Applications
Atmel® Corp. announced the availability of three new driver ICs for high-temperature applications (AECQ100, Grade 0). The ATA6824, ATA6827 and ATA6832 are designed using Atmel's new high-voltage SMARTIS™ technology that enables extremely high chip temperatures of up to 200°C. As a result, ambient temperatures of up to 150°C can be achieved, allowing the use of these devices in hot environments.
In mechatronic solutions such as turbochargers or exhaust gas recirculation systems, many flaps have to be controlled by dc-motor driver ICs which are located very close to a hot engine. To design a complete motor-control system solution, designers can combine the new driver ICs with Atmel's family of ATmega 8-bit AVR® Flash microcontrollers qualified for high- temperature automotive applications.
In contrast to standard BCDMOS bulk technology, Atmel's SMARTIS technology uses an SOI (Silicon-On-Insulator) substrate. Due to the SOI technology's dielectric isolation, the junction leakage, a major issue in high-temperature designs, can be minimized. Furthermore, SOI devices provide superior latch-up immunity for increased reliability of circuits operating in hot environments.
The small, and low-cost ATA6827 is a fully-protected triple half-bridge driver with integrated power stages to control up to 3 different loads by a microcontroller. Each of the three high-side and three low-side drivers are capable of driving currents up to 1.0A. The ATA6827 supports the application of H-bridges to drive dc motors very well. The operation modes reverse, brake, and high impedance are controlled by the SPI interface. The enhanced version, ATA6832, provides an additional PWM functionality with up to 25kHz, enabling a dc motor control to be generated without any audible noise caused by the PWM signal.
The ATA6824, ATA6827 and ATA6832 driver ICs provide several protection features such as over-temperature shutdown, overload and over-voltage protection, as well as protection against short circuits. The devices also meet the strict automotive qualification demands (protection against conducted interference, EMC and ESD protection) and can withstand transients as specified in ISO/TR 7637.
Samples of the driver ICs ATA6824 (QFN32 package), ATA6827 (QFN18 package) and ATA6832 (QFN18 package) are available now. The pricing is $1.85 for the ATA6824, $1.00 for the ATA6827 and $1.05 for the ATA6832 (at 10k each).
