Silicon Labs Introduces Single-Chip Wireless Solution for Battery-Powered Systems with RF Connectivity
Silicon Laboratories Inc. introduced what it says is the industry’s lowest power single-chip wireless microcontrollers (MCUs). Silicon Labs’ new ultra-low-power Si10xx wireless MCU family addresses the power and RF requirements of battery-operated home automation systems, smart meters, in-home utility monitors and security systems.
According to the company, the demand for smart energy technology continues to grow each year as government initiatives mandate upgrades to the grid, as well as adding intelligence to meters that measure water, gas and heat. The market for smart home products, such as lighting and HVAC controls, in-home utility monitors and home security systems, is also on the rise, driven in part by the desire to conserve energy and by the expansion of home automation services and standards-based wireless technologies.
Today’s smart home/smart grid applications merge wired/wireless connectivity and embedded control with power-efficient design to maximize battery life. The ultra-low-power Si10xx wireless MCU family is well suited for these battery-operated systems with RF links, as well as for many other embedded wireless applications that require ultra-low power consumption.
The Si10xx wireless MCUs combine a 25 MHz 8051 core, EZRadioPRO® sub-GHz RF transceiver, up to 64 kB of flash and up to 12-bit ADC – all in a compact 5 x 7mm package. The Si10xx family is described as the industry’s most power-efficient single-chip wireless MCU solution, providing the lowest current in common modes of operation. The wireless MCUs offer the lowest active-mode current consumption (160 µA per MHz). In sleep mode, they consume only 615nA with an active 32.768 kHz real-time clock (RTC) and down to 315nA with an active RTC and a low frequency oscillator (LFO). In deep-sleep mode, they can operate on as little as 25nA with full RAM retention.
The Si10xx family’s ultra-low-power architecture and fast wake-up time (2µs) greatly extends battery life in both lithium and alkaline battery applications. The Si10xx architecture also features a dc-dc boost converter designed to supply large loads with extremely high efficiency. The dc-dc converter supplies power needed for periods of RF transmission and reception with efficiencies of up to 90%. As a result, developers can design embedded wireless systems capable of 25% longer battery life over alternative solutions with no degradation in MCU or radio performance; in some system configurations, an Si10xx device can extend battery life by as much as 50%.
The Si10xx wireless MCUs offer market leading RF performance with the highest output power and sensitivity and lowest power wake-up transition. The Si10xx family’s integrated power amplifier (PA) and low-noise amplifier enable an RF link budget of greater than 140 dB without requiring active external elements. This results in extended range, higher bandwidth and lower overall power consumption.
"The Si10xx family is a battery’s best friend, offering best-in-class energy efficiency that makes it easier to design battery-powered products for the smart home and smart meter markets," said Mark Thompson, Vice President and General Manager of Silicon Labs’ Embedded Mixed Signal products. "By incorporating the EZRadioPRO transceiver, the Si10xx wireless MCUs deliver exceptional RF performance with high output power and superior sensitivity."
Pricing for the Si10xx MCUs starts at $3.51 (USD) in 10K quantities. The Si1000DK development kit is available now for $99 (USD). The WIRELESSMBUSEK evaluation kit is priced at $99 (USD).
