Facebook
Google
GitHub
Linkedin
Hello and happy to be here.
I am a home owner with experience in construction but get a bit hesitant when working with wires. I have a project in which I need some sage advice on what kind of wire can I use.
I'm installing a toilet bidet which requires a 120 volt GFCI outlet. Since this is a bathroom I presume the existing extra outlet in the wall meets that requirement.
However, what I need to do is run a wire from the wall socket along the exterior portion of a wall and then connect it to a plug that will power the bidet.
This is the issue: I need to keep the thickness of the wire as small and flexible as possible because it must turn several 90 degree turns along the path from the sink area to the bidet which is about 25 feet away and since this wire will be visible I would like it to have a low-profile
Any suggestions on the kind of wire I should get from home depot that would fulfill this role? Again, I need the wire to be as thin and flexible as possible. As well some advice on attaching one end of this wire to a plug and the other end to a socket.
Thank you. I hope everyone is doing well.
I am a home owner with experience in construction but get a bit hesitant when working with wires. I have a project in which I need some sage advice on what kind of wire can I use.
I'm installing a toilet bidet which requires a 120 volt GFCI outlet. Since this is a bathroom I presume the existing extra outlet in the wall meets that requirement.
However, what I need to do is run a wire from the wall socket along the exterior portion of a wall and then connect it to a plug that will power the bidet.
This is the issue: I need to keep the thickness of the wire as small and flexible as possible because it must turn several 90 degree turns along the path from the sink area to the bidet which is about 25 feet away and since this wire will be visible I would like it to have a low-profile
Any suggestions on the kind of wire I should get from home depot that would fulfill this role? Again, I need the wire to be as thin and flexible as possible. As well some advice on attaching one end of this wire to a plug and the other end to a socket.
Thank you. I hope everyone is doing well.
