This article highlights Broadcom isolation technologies, namely the optocoupler, magnetic coupler, and capacitive coupler.
March 24, 2020 by Lim Shiun Pin
This article highlights Ridley Engineering Incorporated Leakage Inductance Considerations and Designs of Custom Transformers.
May 26, 2019 by Ray Ridley
Logarithmic Amplifiers are used for isolation in circuit that includes analog and mixed signal ADC, present on circuit board with chipset, diode, etc.
April 10, 2019 by Nelson Quek
This article gives a short overview of the design and power considerations necessary to use constant-current LED drivers in practical applications.
March 18, 2019 by Jan Preibisch
This article highlights Maxim Integrated different types of power supply topologies and introduce a new power supply methodology for power supply…
November 30, 2018 by Michael JacksonJoe McClean
This article discusses Power Integrations Switcher ICs offering significant advantages of programmability, configurability, and adjustability.
June 29, 2018 by Jason Yan
This article features EPCOS AG product PQSine S series designed for 3-phase grids with or without neutral conductors and enables harmonics to be…
April 12, 2018 by Raghavan Venkatesh
This article highlights the features of TDK's CeraPad specifically on its integral ESD protection and its superiority to conventional LEDs.
January 10, 2018 by Dieter Vogel
This article discusses the alternative and new devices that can maintain or improve the thermal performance of MOSFETs in power supplies.
November 13, 2017 by Stefan Preimel
This article highlights Advanced Packaging Center and Alpha Assembly Solutions Silver (Ag) sintering proven and reliable bonding technology for…
February 27, 2017 by Marco Koelink
This article discusses how an 8-bit MCU can be used to alleviate design challenges and create high-performance switched-mode LED driving solutions.
February 15, 2017 by Mark Pallones
Over a decade ago, Power Integrations launched its LinkSwitch™-TN IC product family which has proved highly successful. Now the company has…
January 06, 2017 by Rob Silverstrofimiani
This article introduces the features and advantages of Methode's PowerBud, a new class of patented power connector interface, over…
October 25, 2016 by Russ Larsen
This article highlights the importance of modelling and simulation task in design methodology to reduce the number of design iterations and acquire…
June 02, 2016 by Mike Walters
This article discusses how SemTech's Neo-Iso™ power switch enables IoT and industrial systems better than mechanical and solid-state relays.
May 16, 2016 by Francois Ricodeau
This article offers a method on how a buck-mode DC-to-DC converter IC can be made into a boost-mode device to drive LED strings with higher voltage.
December 07, 2015 by Fons Janssen
This article discusses the advantages of PFC/LLC Combo controller and their key features and benefits in adding flexibility to power supply designs.
November 15, 2015 by Zhihong Yu
This article offers a method on using a small microcontroller to control the LED driver for a dimmable TRIAC for inherent power factor correction.
November 01, 2015 by Kristine Angelica Sumague
This article highlights AEPS-GROUP electrical power supply systems with GaN technology instead of GaAs technology for a reduction in APAR power…
October 25, 2015 by Alexander Goncharov
This article discusses the IMS and the need for standard then offers the IPC/CPCA-4105A, a joint standard covering IMS for product designers.
September 07, 2015 by Dave Sommervold
Don't have an Control account? Create one now.
Forgot your password? Click here.
