New Industry Products

Ruggedized Axial-Leaded Aluminum Electrolytic Capacitor Meets Specs from 40 to 150ºC

May 17, 2017 by Cornell Dubilier

Cornell Dubilier Electronics, Inc. (CDE) has introduced a line of axial-lead aluminum electrolytic capacitors for applications which require very high-performance

Cornell Dubilier Electronics, Inc. (CDE) has introduced a line of axial-lead aluminum electrolytic capacitors for applications which require very high-performance under all operating conditions.  The AXLH is a uniquely-designed axial-lead electrolytic that has the performance characteristics required for mission-critical circuitry.  Continuous ripple current is rated at up to 28 amps RMS.  With a load life rating of 2,000 hours at full-rated voltage and 150 °C, and a shelf life of 10 years, the AXLH will stand the test of time. 

Targeted application fields include military, aerospace, off-road vehicles, infrastructure system electronics.  Nine values are available, from 470 µF to 4,700 µF, with ratings from 25 Vdc to 63 Vdc.  Maximum ESR ranges from 13 to 32 mW at100 kHz.

Where other electrolytics may lose performance under very hot conditions, a hallmark of the AXLH is its ability to handle high ripple current at elevated temperature.  Like other CDE capacitors, the AXLH Series is subject to the industry’s most rigorous dynamic testing.  Procedures outlined in MIL-STD-202, method 204 are used to record the 20g vibration tests. 

AXLH case diameter is a low-profile 20 mm for all values.   Depending on values, lengths vary from 26.5 to 42.5 mm.  The axial-lead wires are a substantial 1 mm.   The devices are RoHS compliant and free of conflict materials.

 

About Cornell Dubilier Electronics

Cornell Dubilier is the source for capacitors that transform your applications to success stories. It excels with aluminum electrolytic, mica, motor run and AC and DC plastic film capacitors. Cornell Dubilier only makes capacitors and has been doing it for almost 100 years.