N
Who here can maybe help with looking at the output ripple of an LED driver through an oscilloscope?
Thank you very much.
Thank you very much.
N
Nali
Also, I'm wondering if this is just the lamp design and I need a new thing all together.
Does your eyes see the ripple? or is it only on the scope?
What frequency of ripple? (time or frequency)
Some LED drivers turn on/off the LED at about 1khz. For half power the LED is latterly off 50% of the time. Other LED drives reduce the current to 1/2. Until I understand what type of "PWM" I can't comment.
Send all the information you have.
What frequency of ripple? (time or frequency)
Some LED drivers turn on/off the LED at about 1khz. For half power the LED is latterly off 50% of the time. Other LED drives reduce the current to 1/2. Until I understand what type of "PWM" I can't comment.
Send all the information you have.
G
Greenville
I would guess it's the design of the lamp.
G
Gerald
Your power supply could be the issue here. I always check that first.
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
| C | LED Driver. Power factor corrected. | General Power Chat | 2 | |
| D | High Current Driver | Power Conversion | 9 | |
| P | Power Supply for LEDs | Batteries & Power Supply Design | 11 | |
| M | Help select igbt driver | Batteries & Power Supply Design | 2 | |
| Z | Questions about powering an LED WS2812B or C | Batteries & Power Supply Design | 2 |
